Electron E1 EVK: Evaluation Kit for Edge AI & Embedded Systems Development | Efficient Computer
When energy is no longer the tradeoff, what will you create?
The Electron E1 is powered by our Fabric architecture, a spatial dataflow design that eliminates the bottlenecks of traditional step-by-step execution. Developers still get the familiar programming experience they expect—but with dramatically higher energy efficiency.
The E1 EVK is designed to make it as easy as possible to explore that potential. Whether you’re bringing up new firmware, running power characterization, or porting existing software, the EVK provides:
- A plug-and-play development workflow
- Built-in energy instrumentation
- Arduino-compatible expansion
- Multiple power options for real-world scenarios
- A complete SDK and quick-start documentation
.avif)
Product documentation
When energy is no longer the tradeoff, what will you create?
Download product brief Access datasheet
Electron E1 EVK jumper/switch map
Jumper/switch positions and configurations
| Component | Position | Description |
|---|---|---|
| J1 | 1 | Battery connector. |
| J2 | 2 | External power connector. |
| J3 | 3 | Parallel connection for SYS shunt resistor. |
| J4 | 4 | Jumper connecting the 1V8 power supply to the E1 hardware and headers. |
| J5 | 5 | Jumper connecting the 3V3 power supply to the E1 peripherals and headers. |
| J6 | 6 | Jumper connecting the 5V0 power supply to the E1 peripherals and headers. |
| J7 | 7 | Parallel connection for 1V8 shunt resistor. |
| J8 | 8 | Jumper enabling power on LED. |
| J12 | 9 | Debug interface to E1 chip. |
| J13 | 10 | Parallel connection for VDDIO shunt resistor. |
| J14 | 11 | Parallel connection for VDDVAR shunt resistor. |
| J16 | 12 | USB connector to the programmer and (optionally) power delivery. |
| J17 | 13 | Pin header to expose programmer interface. |
| J19, J20, J21, J22 | 14 | Arduino UNO shield headers. |
| J23, J24 | 15 | Arduino MKR shield headers. |
| J25, J26 | 16 | E1 GPIO headers. |
| SW1 | 17 | Power source selection. |
| SW2 | 18 | Power on/off switch. |
| SW3 | 19 | E1 reset button. |
| BOOT2, BOOT1, BOOT0 | 20 | Boot mode select switches. |
| JTAG CTRL | 21 | JTAG interface select. |
| SW8 | 22 | Programmer reset. |
| SW9 | 23 | Programmer/E1 interface. |
| SW10 | 24 | Arduino power domain enable. |
| SW11 | 25 | User I/O interface. |
| SW12 | 26 | User button 1. |
| SW13 | 27 | User button 2. |